Vinyl Application Guide

Step 1 — Clean the surface

Ensure the surface is clean, dry and free from dust or oils.

Step 2 — Prepare the decal

Your decal will arrive with transfer tape applied. Carefully peel the backing paper away from the vinyl.

Step 3 — Apply the decal

Position the decal on your surface and gently press it down. Use a card or scraper to smooth the vinyl from the centre outward.

Step 4 — Remove transfer tape

Slowly peel away the transfer tape, leaving the vinyl design in place.

Tips

• Apply to smooth surfaces only
• Avoid textured or powder-coated finishes
• Do not wash for 24 hours after applying